SG TM4992G001  Wrench & immobilizing
SG TM4992G001 Wrench & immobilizing
Data Sheet
Wrench & immobilizing This tool is used to install and remove the nut of the engine output shaft flange. Tool required for replacement of output drive shaft mag-seal (M01). Immobilizing span guides Wrench in center position, avoiding any misalignment and consequent slippage.  
 520,00 Add to basket
SG 8812954000  Protector Guide
SG 8812954000 Protector Guide
Data Sheet
Protector Guide This tool is used during removal/installation of the free wheel assy. and removal of the seal retainer cage from the reduction gearbox module. It protects the output shaft splines.
 235,00 Add to basket
SG 8818841000  Hoisting Beam
SG 8818841000 Hoisting Beam
Data Sheet
Hoisting Beam M05
Lifting device. This tool is used for module 05 "Reduction gearbox" handling and guiding. Use it to remove, install and replace the module 05 - Reduction gearbox.
CE – Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
 
Equivalent reference Arriel 1  HOISTING FLANGE FOR REDUCTION GEAR M05.
SG 8813988000
 
 729,00 Add to basket
SG 365A91-5400-02  Arriel engine sling
SG 365A91-5400-02 Arriel engine sling
Instruction Manual
Tool Use Positions
  Arriel engine sling Fits on all Arriel engines, 1B, 1D1, 2B, 2B1, 2D. CE - Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.  
 742,00 Add to basket
SG 703A97-7210-21 Static test port
SG 703A97-7210-21 Static test port
Data Sheet
Static test port. To be used with any pitot-static test system. Ø6mm hose connection neck.
 155,00 Add to basket
SG 703A95-0505-00 TGB drain plug  275,00 Add to basket
SG 703A95-0508-00  MGB drain plug  295,00 Add to basket
SG 29-TP1PT35A Dzus locks Pressing Tool
SG 29-TP1PT35A Dzus locks Pressing Tool
Data Sheet
Dzus locks Pressing Tool Includes: SG29-TP1PT35A (flare press tool) SG29-TB1PT35A (support block) Set of tools used to install and crimp quarter-turn fasteners Dzus locks p/n: PC3-1-2 PS3-1-2 PF3-1-2-38 PFSC3-1/2-38A
 345,00 Add to basket
SG 350A93-5400-00 Support stand, Arriel engine
SG 350A93-5400-00 Support stand, Arriel engine
Data Sheet
Support stand, Arriel engine Hold the engine during MGB removal or  MGB input seal replacement. Flat base surface to avoid any marks or deformations on the engine deck. Anti-slippage rubber material.  
 284,00 Add to basket
SG 355A91-3740-01  Mast hoisting ring
SG 355A91-3740-01 Mast hoisting ring
Data Sheet
Mast hoisting ring Used to lift MGB or mast when Spring Anti-Vibrator and Starflex star are removed. Threaded hole in the center to fit Eurocopter/Airbus tool 350A91-0005-01. Max lift weight: 2000kg Locking plate and bolts included. CE - Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
 614,00 Add to basket
SG 350A90-03 Spherical bearing play check tool
SG 350A90-03 Spherical bearing play check tool
Data Sheet
Spherical bearing play check tool This tool is specially design to precisely measure radial play on spherical bearings. Can be either used on Tail Rotor/Main Rotor pitch links and servocontrols.
 435,00 Add to basket
SG 6951 365A31-1090-00  Scissors Link Bushings bonding tool.
SG 6951 365A31-1090-00 Scissors Link Bushings bonding tool.
Data Sheet
Tool User Guide
Scissors Link Bushings bonding tool
Tool used to perform the replacement of the scissors link bushings. Able to replace individual bushings or by pairs. Includes bushing extractor SG6801 350A37-1126-01. Applicable bushings P/N: 04-5026, 2163183
 1.945,00 Add to basket
SG 350A93-0033 Spring Anti-Vibrator stand
SG 350A93-0033 Spring Anti-Vibrator stand
Data Sheet
Spring Anti-Vibrator stand Spring anti-vibrator 'chinese hat' maintenance kit.  
 1.015,00 Add to basket
SG 365A93-3111-01 Rotating star bearing extractor
SG 365A93-3111-01 Rotating star bearing extractor
Data Sheet
Rotating star bearing extractor This tool is used to remove the swashplate bearing from the rotating star.  
 1.154,00 Add to basket
SG 350A93-3710-00  Rotating Star Tool
SG 350A93-3710-00 Rotating Star Tool
Data Sheet
Rotating Star Tool This tool is used to remove rotating star from stationary star.  
 1.294,00 Add to basket
SG 350A93-3712-00 Assembly block, rotating star
SG 350A93-3712-00 Assembly block, rotating star
Data Sheet
Assembly block, rotating star This tool is used to adjust the Swashplate Bearing on Rotating Star.
 1.154,00 Add to basket
SG 350A93-3713-00  Assembly block, non-rotating star / rotating star
SG 350A93-3713-00 Assembly block, non-rotating star / rotating star
Data Sheet
Assembly block, non-rotating star / rotating star This tool is used to adjust the rotating star/swasplate bearing assembly into the stationary star.
 565,00 Add to basket
SG 350A93-3717-00  Seal on housing replacement tool
SG 350A93-3717-00 Seal on housing replacement tool
Data Sheet
Seal on housing replacement tool This tool is used to install and remove lip seal from the Main Gear Box  upper housing.  
 774,00 Add to basket
SG 350A93-3410-00 Drive shaft bearing fitting thimble
SG 350A93-3410-00 Drive shaft bearing fitting thimble
Data Sheet
Drive shaft bearing fitting thimble. Tool used during Tail Rotor Drive Shaft sleeve-bearing replacement.
 324,00 Add to basket
SG 350A91-3200-00 Main Gearbox Base
SG 350A91-3200-00 Main Gearbox Base
Data Sheet
Stand ,Main Gearbox Base
  • Can either be used to hold the complete MGB assembly or the Main Rotor Mast upside down.
  • Perfect maneuverability, 4 swivel caster wheels.
  • Pedal brake in all wheels, perfect base stability during maintenance operations.
  • Heavy duty frame built to last.
  • Includes MGB attachment bolts and M14x1,5 mast attachment bolts.
 956,00 Add to basket
SG 350A96-3203-22  Shim, MGB Planet Gear
SG 350A96-3203-22 Shim, MGB Planet Gear
Data Sheet
Shim, MGB Planet Gear Safe lot of money with this cheap safety tool. When sending MGB to overhaul or just for transportation purposes many operators install the Epicyclic gear directly on MGB (lower casing assy) causing damage in the oil injectors. This tool acts as a spacer between the Sun Gear and the Epicyclic preventing from any damages.
 195,00 Add to basket
SG 350A93-3806-00 Wrench, M27
SG 350A93-3806-00 Wrench, M27
Data Sheet
Wrench, M27, bi-directional suspension bar. Perfect alignment due to inserted guide pin, anti-slippage protection.
 345,00 Add to basket
SG 350A93-3804-00  Wrench, M22
SG 350A93-3804-00 Wrench, M22
Data Sheet
Wrench, M22 bi-directional suspension bar.
 325,00 Add to basket
SG 703A94-1130-01  Tab checking and adjustment tool
SG 703A94-1130-01 Tab checking and adjustment tool
Data Sheet
Improved design,better reading on vernier plate.
 1.760,00 Add to basket
SG 350A93-3550-01 Hydraulic pump drive bearing replacement
SG 350A93-3550-01 Hydraulic pump drive bearing replacement
Tool User Guide
Tools kit to remove / install hydraulic pump drive bearing.
 3.150,00 Add to basket
SG 350A93-3500-00 Hydraulic pump bearing replacement tool
SG 350A93-3500-00 Hydraulic pump bearing replacement tool
Data Sheet
Set of tools, hydraulic pump bearing replacement. Includes:  SG 350A93-3501-20 driven pulley extraction tool
Hydraulic pump bearing replacement tool.
Complete set of tools to remove and install hydraulic pump bearing.
AS350 effectivity: Pre Mod. 079566
 .
 845,00 Add to basket
SG 350A93-3200-20  Wrench for MGB power take-off
SG 350A93-3200-20 Wrench for MGB power take-off
Data Sheet
Wrench, MGB power take-off Due to aluminum outer ring the tool fits perfectly into MGB housing, this prevents from misalignments between the wrench and MGB nut during high torque operations (anti-slippage protection).
 490,00 Add to basket
SG 350A93-3202-00  Power seal extractor
SG 350A93-3202-00 Power seal extractor
Data sheet
Main Gear Box input Seal . Extractor, seal on Main Gear Box input shaft. Improved arm design guarantees proper and easy removal of the seal. Three jaws, extractor body and clamp included.
 1.850,00 Add to basket
SG 350A93-3203-20    Seal / bush installation block
SG 350A93-3203-20 Seal / bush installation block
Data Sheet
Main Gear Box input Seal / bush installation block.
 265,00 Add to basket
SGBST-02 Engine sensor test kit
SGBST-02 Engine sensor test kit
Data Sheet
SGBST-02 has been designed to safety test wide range of Turbomeca® Arrius 2 and Arriel 2 engines pressure switches and transmitters mainly installed in AS350B3®, EC130®, EC120® and EC135® airframes. This tools provides smooth and high accurate pressure adjustment upon all ranges. Easy to pack and transport, does not requires any hydraulic fluid or electrical supply. Simple, fast and clean. The pressure gauge is installed in a Minimess adapter, easy to remove and install. SGBST-02 includes pressure gauge calibration certificate and foam cut hard case.
  • No hydraulic fluids needed
  • Light and compact tool
  • High resolution analog pressure gauge
  • Suitable in all engine sensors
CE – Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
 3.392,00 Add to basket