AS355® - 01 ALL TOOLS
Showing 1–40 of 69 results
SG 355A94-3740-00 6° adjustment template
Main Rotor Flight ControlsSG355A94-3740-00 6° adjustment template. Flight control rigging, versions AS355 F, F1, F2.
SG 350A93-3309-00 Flange Extractor TGB
This tool is used to remove the flange from the Tail Gear Box.
SG 350A91-3105-02 Sling, Main Rotor Hub
Device to remove / install the Main Rotor Hub, straps passing under the sleeves. Maximum admissible lifting load: 500 kg CE – Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
SG 6801K33-1058-02 Curing tool, bushes TGB Control Lever
Replacement of the bushes on the control lever - Tail Gear Box
Curing tool.Equivalent Part Number: SG 350A33105802-6801
SG 6803K33-1058-01 Extraction tool, bushes TGB Control Lever
Replacement of the bushes on the control lever - Tail Gear Box
Data SheetEquivalent Part Number: SG 350A33105801-6803
SG 355A94-3745-01 Swashplate immobilizing assembly.
Main Rotor Flight Controls (dual hydraulic)Includes: SG355A94-3745-01 Swashplate immobilizing assembly. Qty: 3 units.
SG 703A91-0211-01 Shackle, size 16
Working Load Limit (WLL): 3,25 Ton. Shackle size: 16 mm - 5/8 " Yellow pin, 19 mm diameter. Delivered with CE Certificate of Confirmity.
SG 350A98-0001-00 Fin attachment tightening wrench, vertical stabilizer
Fin attachment tightening wrench During some periodic inspections, it is required to check the tightening torque of the screws attaching the upper fin to the tail boom. This check is difficult to perform due to the missing clearance between the screws to be checked and the Tail Gearbox (TGB). This tool enables the check the tightening torque of the upper fin attachment screws.
SG 350A90-10 Long Rod Ball-Joint Replacement tool
This tool kit is used to replace the Long Rod Spherical Bearing. Drawings in accordance with H125 AMM task 67-21-00,8-2
SG 350A90-08 Accumulator Charging Tool
Data SheetSG350A90-08 has been designed to safety charge accumulator installed in AS350B3®, AS355®, EC120®. This tools provides smooth and high accurate pressure adjustment upon all ranges. Easy to pack and transport. SG350A90-08 includes pressure gauge calibration certificate and foam cut hard case
- Pressure release function allowed.
Blanking CapsComplete set of plugs to safety blank all pipes , hoses, connectors and threads commonly used on engine and airframe (H125, H130, H120 and many other Airbus Helicopters types). Includes small tapered caps specially made for Turbomeca fuel/oil cavities and pipes.
SG 350A90-07 Vibrex / Chadwick vibration adjustment, removable parts.
Complete set of brackets to perform vibration adjustments on Main Rotor, Tail Rotor Drive Shaft and Tail rotor. Includes: 3 tracking brackets (blade tips, main rotor). Swashplate magnetic pick up bracket (main rotor). Mast lateral accelerometer support (main rotor). Vertical accelerometer support, forward section of the cabin floor (main rotor). TRDS photocell bracket. TRDS accelerometer support. Tail Rotor Gearbox bracket, photocell and accelerometer (tail rotor).
SG 350A90-07 Tail Rotor accelerometer support
Bracket, tail rotor accelerometer and photocell.Tool used for Tail Rotor Balancing. Suitable for Chadwick and Banner photocells. Precise setting of photocell pointing, avoid twisting problems on balancing charts.
SG 350A90-06 TRDS Bearing Extractor
Removal / installation Tail Rotor Drive Shaft BearingsComplete set of tools used to remove the bearings from the shaft.
SGK-06 Removal / Installation MGB 4-Contact Bearing
Assembly / disassembly Main Gear Box 4-contact bearingComplete set of tools needed to perform the epicyclic 4-contact bearing replacement. Tools included: SG350A93-3221-00 Bearing box replacement SG350A93-3223-00 Extractor, Bearing Housing SG350A93-3224-00 Retainer / Bearing installation
SG 350A90-05 Landing Gear Skid bumper protectors
Landing Gear Skids protection Pair of bumper protectors, protect Landing Gear Skid tube from Handling Wheels impacts and damage. 0.5mm thickness, Stainless Steel, matt.
SG 350A93-3714-00 Swashplate Ball Joint Adjustment Tool
Adjustment tool, swashplate ball joint This tool is used to mesure and adjust axial play on swashplate ball joint.
SG 350A93-3224-00 Retainer / bearing installation
Retainer / bearing installation This tool is used to install the planet gear carrier assembly (epicyclic) in the 4-contact bearing.
Data SheetSG350A93-3224-20 Pusher SG350A93-3224-21 Mount
SG 350A93-3223-00 Extractor, Bearing Housing
Bearing / retainer extractor This tool is used to remove the equipped planet gear cage (epicyclic) from the 4-contact bearing.
SG 350A93-3221-00 Bearing box replacement
Bearing / retainer replacement This tool is used to remove and install the epicyclic 4-contact bearing from the retainer.
Data SheetSG350A93-3221-20 Pusher SG350A93-3221-21 Mount
SGHK-4 Cargo Hook Load Test Bench
Instruction ManualSGHK-4 has been designed to safety perform proof load tests up to 4500 kg (9923 pounds) in different cargo hook sizes and configurations.
- Light and compact heavy duty frame built to last with handles for easy transport.
- Polycarbonate protection shield.
- High resolution analog pressure gauge (calibration certificate included).
- Ready to use, no additional hardware needed.
- Able to test electric swivel bearings.
SG 8816448000 Wrench and immobilisation tool
SG 8817516000 Engine support
Data SheetEngine support, Arrius 1
SGK-05 TGB input seal replacement
Parts ListTail Gear Box input seal replacement Complete set of tools used to replace the magnetic seal on Tail Gear Box. Tools included: SG350A93-3307-00 T.G.B seal holder extractor SG350A93-3305-20 T.G.B Wrench SG350A93-3205-00 Lock wrench SG350A93-3308-00 Exchange seal / seal support
SGK-03 Removal/installation Bidirectional cross-bar Laminated Suspension Blocks
Removal/installation Bidirectional cross-bar Laminated Suspension Blocks.
Complete set of tools needed to replace Laminated Suspension Blocks on Bidirectional Cross-bar.
SG350A93-3800-20 Immobilizing fork, 39mm long SG350A93-3802-21 Immobilizing fork, 47mm long SG350A93-3804-00 Wrench M22 SG350A93-3806-00 Wrench M27
SGK-02 Tail Gear Box Control Plate Bearing removal / installation
Data SheetTail Gear Box Control Plate Bearing removal / installation Complete set of tools needed to perform maintenance on TGB Control Plate Bearing. Tools included: SG350A93-3316-20 Rotating star replacement wrench SG350A93-3317-20 Seal fitting tool SG350A93-3320-00 Fit. Bearing seal / stationary sleeve SG350A93-3321-00 Fit. Double-seal /bush SG350A93-3322-00 Fit. Double-seal / cap SG350A93-3323-00 Fit. Non-rotating / rotating sleeve SG350A93-3324-00 Extractor non-rotating / rotating sleeve
SGK-01 Assembly / disassembly swashplate bearing
Data SheetAssembly / disassembly swashplate bearing Complete set of tools needed to perform the swasplate bearing replacement. Tools included: SG350A93-3710-00 Rotating Star Tool SG350A93-3712-00 Assembly block, rotating star SG350A93-3713-00 Assembly block, non-rotating star / rotating star SG365A93-3111-01 Rotating star bearing extractor
SGHU-05 Hydraulic Power Unit
Data SheetSGHU-05 Hydraulic Unit has been designed to safety test AS350®, AS355® and EC130® hydraulic systems. This unit is specially useful to fulfill all requirements and checks related to hydraulic components and associated systems. Ready to use, no additional hardware needed. Light and compact heavy duty frame built to last with wheels for easy transport.
SG 350A90-04 | Main Rotor Hub / Mast blanking cap
Data SheetMain Rotor Hub / Mast blanking cap This tool is used to blank the Main Rotor Mast when the Spring Anti-vibrator is removed.
SG 703A95-0505-00 TGB drain plug
Data SheetTail Gear Box drain plug
SG 703A95-0508-00 MGB drain plug
Data SheetMain Gear Box drain plug
SG 703A95-0520-01 Engine oil & hydraulic fluid drain plug
Data SheetEngine oil and hydraulic fluid drain plug
SG 350A93-2050 Disassembly / Assembly Landing Gear Dampers
Data SheetDisassembly / Reassembly Landing Gear Dampers This tool is used to screw and unscrew landing gear damper covers.
SG 355A93-7540-00 Tooling, replacement load compensator piston seals
Data SheetTooling, replacement load compensator piston seals Allows to install new seals into the piston grooves without any deformation. Also includes tapered guide to install the equipped piston on load compensator sleeve.
SG 355A91-3740-01 Mast hoisting ring
Mast hoisting ring Used to lift MGB or mast when Spring Anti-Vibrator and Starflex star are removed. Threaded hole in the center to fit Eurocopter/Airbus tool 350A91-0005-01. Max lift weight: 1500 kg Locking plate and bolts included. CE - Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
SG 350A90-03 Spherical bearing play check tool
Data SheetSpherical bearing play check tool This tool is specially design to precisely measure radial play on spherical bearings. Can be either used on Tail Rotor/Main Rotor pitch links and servocontrols.
SG 6951 365A31-1090-00 Scissors Link Bushings bonding tool.
Tool User Guide
Scissors Link Bushings bonding tool
Tool used to perform the replacement of the scissors link bushings. Able to replace individual bushings or by pairs. Includes bushing extractor SG6801 350A37-1126-01. Applicable bushings P/N: 04-5026, 2163183