View Basket “SG 703A95-0508-00 MGB drain plug” has been added to your basket.
SG350A90-12 Tail Rotor Control Bearing Lock Device
SG350A90-12 Tail Rotor Control Bearing Lock Device
Tool used to hold and lock the Spider assy in the vice when installing/removing the castellated nut. Fits on all spiders, even reinforced spider plate 350A33-2166-02.
 350,00 Add to basket
SG 355A94-3740-00    6° adjustment template
SG 355A94-3740-00 6° adjustment template

Main Rotor Flight Controls

SG355A94-3740-00    6° adjustment template. Flight control rigging, versions AS355 F, F1, F2.
 57,00 Add to basket
SG 350A93-3309-00 Flange Extractor TGB
SG 350A93-3309-00 Flange Extractor TGB
This tool is used to remove the flange from the Tail Gear Box.
 
 120,00 Add to basket
SG 350A91-3105-02  Sling, Main Rotor Hub
SG 350A91-3105-02 Sling, Main Rotor Hub
Device to remove / install the Main Rotor Hub, straps passing under the sleeves. Maximum admissible lifting load: 500 kg CE – Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
 495,00 Add to basket
SG 6801K33-1058-02 Curing tool, bushes TGB Control Lever
SG 6801K33-1058-02 Curing tool, bushes TGB Control Lever

Replacement of the bushes on the control lever - Tail Gear Box

 Curing tool.

  Equivalent Part Number: SG 350A33105802-6801  
 463,00 Add to basket
SG 6803K33-1058-01 Extraction tool, bushes TGB Control Lever
SG 6803K33-1058-01 Extraction tool, bushes TGB Control Lever

Replacement of the bushes on the control lever - Tail Gear Box

Data Sheet
  Equivalent Part Number:  SG 350A33105801-6803  
 998,00 Add to basket
SG 355A94-3745-01 Swashplate immobilizing assembly.
SG 355A94-3745-01 Swashplate immobilizing assembly.

Main Rotor Flight Controls (dual hydraulic)

Includes: SG355A94-3745-01 Swashplate immobilizing assembly. Qty: 3 units.
 695,00 Add to basket
SG 703A91-0211-01 Shackle, size 16
SG 703A91-0211-01 Shackle, size 16
Working Load Limit (WLL): 3,25 Ton. Shackle size: 16 mm - 5/8 " Yellow pin, 19 mm diameter. Delivered with CE Certificate of Confirmity.
 12,00 Add to basket
SG 350A98-0001-00 Fin attachment tightening wrench, vertical stabilizer
SG 350A98-0001-00 Fin attachment tightening wrench, vertical stabilizer
Fin attachment tightening wrench During some periodic  inspections, it is required to check the tightening torque of the screws attaching the upper fin to the tail boom. This check is difficult to perform due to the missing clearance between the screws to be checked and the Tail Gearbox (TGB). This tool enables the check the tightening torque of the upper fin attachment screws.
 147,00 Add to basket
SG 350A90-10 Long Rod Ball-Joint Replacement tool
SG 350A90-10 Long Rod Ball-Joint Replacement tool
This tool kit is used to replace the Long Rod Spherical Bearing. Drawings in accordance with H125 AMM task 67-21-00,8-2      
 970,00 Add to basket
SG 350A90-08 Accumulator Charging Tool
SG 350A90-08 Accumulator Charging Tool
Data Sheet
SG350A90-08 has been designed to safety charge accumulator installed in AS350B3®, AS355®, EC120®. This tools provides smooth and high accurate pressure adjustment upon all ranges. Easy to pack and transport. SG350A90-08 includes pressure gauge calibration certificate and foam cut hard case  
  • Pressure release function allowed.
  CE – Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
 1.185,00 Add to basket
Blanking Caps
Blanking Caps
 Blanking Caps
Complete set of plugs to safety blank all pipes , hoses, connectors and threads commonly used on engine and airframe (H125, H130, H120 and many other Airbus Helicopters types). Includes small tapered caps specially made for Turbomeca fuel/oil cavities and pipes.  
 165,00 Add to basket
SG 350A90-07 Vibrex / Chadwick vibration adjustment, removable parts.
SG 350A90-07 Vibrex / Chadwick vibration adjustment, removable parts.
Complete set of brackets to perform vibration adjustments on Main Rotor, Tail Rotor Drive Shaft and Tail rotor. Includes: 3 tracking brackets (blade tips, main rotor). Swashplate magnetic pick up bracket (main rotor). Mast lateral accelerometer support (main rotor). Vertical accelerometer support, forward section of the cabin floor (main rotor). TRDS photocell bracket. TRDS accelerometer support. Tail Rotor Gearbox bracket, photocell and accelerometer (tail rotor).
 615,00 Add to basket
SG 350A90-07 Tail Rotor accelerometer support
SG 350A90-07 Tail Rotor accelerometer support
 
Data Sheet
Bracket, tail rotor accelerometer and photocell.
Tool used for Tail Rotor Balancing. Suitable for Chadwick and Banner photocells. Precise setting of photocell pointing, avoid twisting problems on balancing charts.    
 
 197,00 Add to basket
SG 350A90-06 TRDS Bearing Extractor
SG 350A90-06 TRDS Bearing Extractor
 
Data Sheet
Removal / installation Tail Rotor Drive Shaft  Bearings
Complete set of tools used to remove the bearings from the shaft.  
 
 887,00 Add to basket
SGK-06 Removal / Installation MGB 4-Contact Bearing
SGK-06 Removal / Installation MGB 4-Contact Bearing
 
Data Sheet
Assembly / disassembly Main Gear Box 4-contact bearing
Complete set of tools needed to perform the epicyclic 4-contact bearing replacement. Tools included: SG350A93-3221-00 Bearing box replacement SG350A93-3223-00 Extractor, Bearing Housing SG350A93-3224-00 Retainer / Bearing installation  
 
 4.190,00 Add to basket
SG 350A90-05 Landing Gear Skid bumper protectors
SG 350A90-05 Landing Gear Skid bumper protectors
Landing Gear Skids protection Pair of bumper protectors, protect Landing Gear Skid tube from Handling Wheels impacts and damage. 0.5mm thickness, Stainless Steel, matt.
User Guide
 
 170,00 Add to basket
SG 350A93-3714-00 Swashplate Ball Joint Adjustment Tool
SG 350A93-3714-00 Swashplate Ball Joint Adjustment Tool
Adjustment tool, swashplate ball joint This tool is used to mesure and adjust axial play on swashplate ball joint.    
Data Sheet
 
 1.495,00 Add to basket
SG 350A93-3224-00 Retainer / bearing installation
SG 350A93-3224-00 Retainer / bearing installation
Retainer / bearing installation This tool is used to install the planet gear carrier assembly (epicyclic) in the 4-contact bearing.
Data Sheet
SG350A93-3224-20 Pusher SG350A93-3224-21 Mount  
 2.185,00 Add to basket
SG 350A93-3223-00 Extractor, Bearing Housing
SG 350A93-3223-00 Extractor, Bearing Housing
  Bearing / retainer extractor This tool is used to remove the equipped planet gear cage (epicyclic) from the 4-contact bearing.
Data Sheet
 
 3.190,00 Add to basket
SG 350A93-3221-00 Bearing box replacement
SG 350A93-3221-00 Bearing box replacement
Bearing / retainer replacement This tool is used to remove and install the epicyclic 4-contact bearing from the retainer.
Data Sheet
SG350A93-3221-20 Pusher SG350A93-3221-21 Mount  
 675,00 Add to basket
SGHK-4   Cargo Hook Load Test Bench
SGHK-4 Cargo Hook Load Test Bench
Instruction Manual
SGHK-4 has been designed to safety perform proof load tests up to 4500 kg (9923 pounds) in different cargo hook sizes and configurations.
  • Light and compact heavy duty frame built to last with handles for easy transport.
  • Polycarbonate protection shield.
  • High resolution analog pressure gauge (calibration certificate included).
  • Ready to use, no additional hardware needed.
  • Able to test electric swivel bearings.
For further information about SGHK-4 compatibility in different hook types ask to: info@sgst.es
 4.370,00 Add to basket
SG 8816448000 Wrench and immobilisation tool
SG 8816448000 Wrench and immobilisation tool
Wrench and Retainer This tool is used for Module 01 power drive seal replacement. Attached to the splined flange of the power drive, this tool is used to guide and unlock/lock the securing nut of the flange.
 535,00 Add to basket
SG 8817516000  Engine support  1.379,00 Add to basket
SGK-05 TGB input seal replacement
SGK-05 TGB input seal replacement
Parts List
Tail Gear Box input seal replacement Complete set of tools used to replace the magnetic seal on Tail Gear Box. Tools included: SG350A93-3307-00 T.G.B seal holder extractor SG350A93-3305-20 T.G.B Wrench SG350A93-3205-00 Lock wrench SG350A93-3308-00 Exchange seal / seal support
 
 1.945,00 Add to basket
SGK-03 Removal/installation Bidirectional cross-bar Laminated Suspension Blocks
SGK-03 Removal/installation Bidirectional cross-bar Laminated Suspension Blocks
Data Sheet
Removal/installation Bidirectional cross-bar Laminated Suspension Blocks.
Complete set of tools needed to replace Laminated Suspension Blocks on Bidirectional Cross-bar.
Tools included:
SG350A93-3800-20 Immobilizing fork, 39mm long SG350A93-3802-21 Immobilizing fork, 47mm long SG350A93-3804-00 Wrench M22 SG350A93-3806-00 Wrench M27
 1.005,00 Add to basket
SGK-02 Tail Gear Box Control Plate Bearing removal / installation
SGK-02 Tail Gear Box Control Plate Bearing removal / installation
Data Sheet
Tail Gear Box Control Plate Bearing removal / installation Complete set of tools needed to perform maintenance on TGB Control Plate Bearing. Tools included: SG350A93-3316-20 Rotating star replacement wrench SG350A93-3317-20 Seal fitting tool SG350A93-3320-00 Fit. Bearing seal / stationary sleeve SG350A93-3321-00 Fit. Double-seal /bush SG350A93-3322-00 Fit. Double-seal / cap SG350A93-3323-00 Fit. Non-rotating / rotating sleeve SG350A93-3324-00 Extractor non-rotating / rotating sleeve  
 3.953,00 Add to basket
SGK-01  Assembly / disassembly swashplate bearing
SGK-01 Assembly / disassembly swashplate bearing
Data Sheet
Assembly / disassembly swashplate bearing Complete set of tools needed to perform the swasplate bearing replacement. Tools included: SG350A93-3710-00 Rotating Star Tool SG350A93-3712-00 Assembly block, rotating star SG350A93-3713-00 Assembly block, non-rotating star / rotating star SG365A93-3111-01 Rotating star bearing extractor
 3.650,00 Add to basket
SGHU-05 Hydraulic Power Unit
SGHU-05 Hydraulic Power Unit
Data Sheet
SGHU-05 Hydraulic Unit has been designed to safety test AS350®, AS355® and EC130® hydraulic systems. This unit is specially useful to fulfill all requirements and checks related to hydraulic components and associated systems. Ready to use, no additional hardware needed. Light and compact heavy duty frame built to last with wheels for easy transport.
 4.515,00 Add to basket
SG 350A90-04 | Main Rotor Hub / Mast blanking cap
SG 350A90-04 | Main Rotor Hub / Mast blanking cap
Data Sheet
Main Rotor Hub / Mast blanking cap This tool is used to blank the Main Rotor Mast when the Spring Anti-vibrator is removed.
 208,00 Add to basket
SG 703A97-7210-21 Static test port
SG 703A97-7210-21 Static test port
Data Sheet
Static test port. To be used with any pitot-static test system. Ø6mm hose connection neck.
 165,00 Add to basket
SG 703A95-0505-00 TGB drain plug  275,00 Add to basket
SG 703A95-0508-00  MGB drain plug  295,00 Add to basket
SG 350A93-2050  Disassembly / Assembly Landing Gear Dampers
SG 350A93-2050 Disassembly / Assembly Landing Gear Dampers
Data Sheet
Disassembly / Reassembly Landing Gear Dampers This tool is used to screw and unscrew landing gear damper covers.
 75,00 Add to basket
SG 29-TP1PT35A Dzus locks Pressing Tool
SG 29-TP1PT35A Dzus locks Pressing Tool
Data Sheet
Dzus locks Pressing Tool Includes: SG29-TP1PT35A (flare press tool) SG29-TB1PT35A (support block) Set of tools used to install and crimp quarter-turn fasteners Dzus locks p/n: PC3-1-2 PS3-1-2 PF3-1-2-38 PFSC3-1/2-38A
 345,00 Add to basket
SG 355A93-7540-00 Tooling, replacement load compensator piston seals
SG 355A93-7540-00 Tooling, replacement load compensator piston seals
Data Sheet
Tooling, replacement load compensator piston seals Allows to install new seals into the piston grooves without any deformation. Also includes tapered guide to install the equipped piston on load compensator sleeve.
 410,00 Add to basket
SG 355A91-3740-01  Mast hoisting ring
SG 355A91-3740-01 Mast hoisting ring
Mast hoisting ring Used to lift MGB or mast when Spring Anti-Vibrator and Starflex star are removed. Threaded hole in the center to fit Eurocopter/Airbus tool 350A91-0005-01. Max lift weight: 1500 kg Locking plate and bolts included. CE - Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
 614,00 Add to basket
SG 350A90-03 Spherical bearing play check tool
SG 350A90-03 Spherical bearing play check tool
Data Sheet
Spherical bearing play check tool This tool is specially design to precisely measure radial play on spherical bearings. Can be either used on Tail Rotor/Main Rotor pitch links and servocontrols.
 435,00 Add to basket
SG 6951 365A31-1090-00  Scissors Link Bushings bonding tool.
SG 6951 365A31-1090-00 Scissors Link Bushings bonding tool.
Data Sheet
Tool User Guide
Scissors Link Bushings bonding tool
Tool used to perform the replacement of the scissors link bushings. Able to replace individual bushings or by pairs. Includes bushing extractor SG6801 350A37-1126-01. Applicable bushings P/N: 04-5026, 2163183
 1.945,00 Add to basket