AS355® - 62 MAIN ROTOR
SG 355A94-3740-00 6° adjustment template
Main Rotor Flight Controls
SG355A94-3740-00 6° adjustment template. Flight control rigging, versions AS355 F, F1, F2.
SG 350A91-3105-02 Sling, Main Rotor Hub
Device to remove / install the Main Rotor Hub, straps passing under the sleeves.
Maximum admissible lifting load: 500 kg
CE – Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
SG 355A94-3745-01 Swashplate immobilizing assembly.
Main Rotor Flight Controls (dual hydraulic)
Includes: SG355A94-3745-01 Swashplate immobilizing assembly. Qty: 3 units.
SG 703A91-0211-01 Shackle, size 16
Working Load Limit (WLL): 3,25 Ton.
Shackle size: 16 mm - 5/8 "
Yellow pin, 19 mm diameter.
Delivered with CE Certificate of Confirmity.
SG 350A90-07 Vibrex / Chadwick vibration adjustment, removable parts.
Complete set of brackets to perform vibration adjustments on Main Rotor, Tail Rotor Drive Shaft and Tail rotor.
Includes:
3 tracking brackets (blade tips, main rotor).
Swashplate magnetic pick up bracket (main rotor).
Mast lateral accelerometer support (main rotor).
Vertical accelerometer support, forward section of the cabin floor (main rotor).
TRDS photocell bracket.
TRDS accelerometer support.
Tail Rotor Gearbox bracket, photocell and accelerometer (tail rotor).
SGK-06 Removal / Installation MGB 4-Contact Bearing
Data Sheet
Assembly / disassembly Main Gear Box 4-contact bearing
Complete set of tools needed to perform the epicyclic 4-contact bearing replacement. Tools included: SG350A93-3221-00 Bearing box replacement SG350A93-3223-00 Extractor, Bearing Housing SG350A93-3224-00 Retainer / Bearing installation
SG 350A93-3714-00 Swashplate Ball Joint Adjustment Tool
Adjustment tool, swashplate ball joint
This tool is used to mesure and adjust axial play on swashplate ball joint.
Data Sheet
SG 350A93-3224-00 Retainer / bearing installation
Retainer / bearing installation
This tool is used to install the planet gear carrier assembly (epicyclic) in the 4-contact bearing.
Data Sheet
SG350A93-3224-20 Pusher SG350A93-3224-21 Mount
SG 350A93-3223-00 Extractor, Bearing Housing
Bearing / retainer extractor
This tool is used to remove the equipped planet gear cage (epicyclic) from the 4-contact bearing.
Data Sheet
SG 350A93-3221-00 Bearing box replacement
Bearing / retainer replacement
This tool is used to remove and install the epicyclic 4-contact bearing from the retainer.
Data Sheet
SG350A93-3221-20 Pusher SG350A93-3221-21 Mount
SGK-01 Assembly / disassembly swashplate bearing
Data Sheet
Assembly / disassembly swashplate bearing Complete set of tools needed to perform the swasplate bearing replacement. Tools included: SG350A93-3710-00 Rotating Star Tool SG350A93-3712-00 Assembly block, rotating star SG350A93-3713-00 Assembly block, non-rotating star / rotating star SG365A93-3111-01 Rotating star bearing extractor
SG 350A90-04 | Main Rotor Hub / Mast blanking cap
Data Sheet
Main Rotor Hub / Mast blanking cap This tool is used to blank the Main Rotor Mast when the Spring Anti-vibrator is removed.
SG 355A91-3740-01 Mast hoisting ring
Mast hoisting ring
Used to lift MGB or mast when Spring Anti-Vibrator and Starflex star are removed.
Threaded hole in the center to fit Eurocopter/Airbus tool 350A91-0005-01.
Max lift weight: 1500 kg
Locking plate and bolts included.
CE - Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
SG 350A90-03 Spherical bearing play check tool
Data Sheet
Spherical bearing play check tool This tool is specially design to precisely measure radial play on spherical bearings. Can be either used on Tail Rotor/Main Rotor pitch links and servocontrols.
SG 6951 365A31-1090-00 Scissors Link Bushings bonding tool.
Data Sheet
Tool User Guide
Scissors Link Bushings bonding tool
Tool used to perform the replacement of the scissors link bushings. Able to replace individual bushings or by pairs.
Includes bushing extractor SG6801 350A37-1126-01.
Applicable bushings P/N: 04-5026, 2163183
SG 350A93-0033 Spring Anti-Vibrator stand
Data Sheet
Spring Anti-Vibrator stand Spring anti-vibrator 'chinese hat' maintenance kit.
SG 365A93-3111-01 Rotating star bearing extractor
Data Sheet
Rotating star bearing extractor This tool is used to remove the swashplate bearing from the rotating star.
SG 350A93-3710-00 Rotating Star Tool
Data Sheet
Rotating Star Tool This tool is used to remove rotating star from stationary star.
SG 350A93-3712-00 Assembly block, rotating star
Data Sheet
Assembly block, rotating star This tool is used to adjust the Swashplate Bearing on Rotating Star.
SG 350A93-3713-00 Assembly block, non-rotating star / rotating star
Data Sheet
Assembly block, non-rotating star / rotating star This tool is used to adjust the rotating star/swasplate bearing assembly into the stationary star.
SG 350A93-3717-00 Seal on housing replacement tool
Data Sheet
Seal on housing replacement tool This tool is used to install and remove lip seal from the Main Gear Box upper housing.
SG 350A91-3200-00 Main Gearbox Base
Data Sheet
Stand ,Main Gearbox Base- Can either be used to hold the complete MGB assembly or the Main Rotor Mast upside down.
- Perfect maneuverability, 4 swivel caster wheels.
- Pedal brake in all wheels, perfect base stability during maintenance operations.
- Heavy duty frame built to last.
- Includes MGB attachment bolts and M14x1,5 mast attachment bolts.
