AS350® H125® - 01 ALL TOOLS
Showing 41–80 of 107 results
SGHK-4 Cargo Hook Load Test Bench
Instruction Manual
SGHK-4 has been designed to safety perform proof load tests up to 4500 kg (9923 pounds) in different cargo hook sizes and configurations.- Light and compact heavy duty frame built to last with handles for easy transport.
- Polycarbonate protection shield.
- High resolution analog pressure gauge (calibration certificate included).
- Ready to use, no additional hardware needed.
- Able to test electric swivel bearings.
SGK-05 TGB input seal replacement
Parts List
Tail Gear Box input seal replacement Complete set of tools used to replace the magnetic seal on Tail Gear Box. Tools included: SG350A93-3307-00 T.G.B seal holder extractor SG350A93-3305-20 T.G.B Wrench SG350A93-3205-00 Lock wrench SG350A93-3308-00 Exchange seal / seal supportSGK-04 MGB input seal replacement
Parts List
Complete set of tools used to replace the Main Gear Box input seal. PRE & POST MOD 077240 Tools included: SG350A93-3201-00 Bush extractor SG350A93-3202-00 Power seal extractor SG350A93-3206-20 Seal / bush installation block SG350A93-3206-21 Shaft protection SG350A93-3200-20 Wrench for MGB power take-off SG350A93-3205-00 Lock wrenchSGK-03 Removal/installation Bidirectional cross-bar Laminated Suspension Blocks
Data Sheet
Removal/installation Bidirectional cross-bar Laminated Suspension Blocks.
Complete set of tools needed to replace Laminated Suspension Blocks on Bidirectional Cross-bar.
Tools included:
SG350A93-3800-20 Immobilizing fork, 39mm long
SG350A93-3802-21 Immobilizing fork, 47mm long
SG350A93-3804-00 Wrench M22
SG350A93-3806-00 Wrench M27
SGK-02 Tail Gear Box Control Plate Bearing removal / installation
Data Sheet
Tail Gear Box Control Plate Bearing removal / installation Complete set of tools needed to perform maintenance on TGB Control Plate Bearing. Tools included: SG350A93-3316-20 Rotating star replacement wrench SG350A93-3317-20 Seal fitting tool SG350A93-3320-00 Fit. Bearing seal / stationary sleeve SG350A93-3321-00 Fit. Double-seal /bush SG350A93-3322-00 Fit. Double-seal / cap SG350A93-3323-00 Fit. Non-rotating / rotating sleeve SG350A93-3324-00 Extractor non-rotating / rotating sleeveSGK-01 Assembly / disassembly swashplate bearing
Data Sheet
Assembly / disassembly swashplate bearing Complete set of tools needed to perform the swasplate bearing replacement. Tools included: SG350A93-3710-00 Rotating Star Tool SG350A93-3712-00 Assembly block, rotating star SG350A93-3713-00 Assembly block, non-rotating star / rotating star SG365A93-3111-01 Rotating star bearing extractorSGHU-05 Hydraulic Power Unit
Data Sheet
SGHU-05 Hydraulic Unit has been designed to safety test AS350®, AS355® and EC130® hydraulic systems. This unit is specially useful to fulfill all requirements and checks related to hydraulic components and associated systems. Ready to use, no additional hardware needed. Light and compact heavy duty frame built to last with wheels for easy transport.SG TM4229G001 Harness, P & T transmitter
Data Sheet
Tool required for the inspection and check procedures of the pressure and temperature transmitter It used as the interface between the engine power system, the P & T transmitter and a measuring device. Arriel 2DSG TM4227G001 Harness, Pressure Transmitter
Data Sheet
This tool is used for the inspection and check procedures of the pressure transmitter. It used as the interface between the engine power system, the pressure transmitter and measuring device. Arriel 2DSG 8819796000 Harness, P3
Data Sheet
This tool is used for the inspection and check procedures of P3 air pressure transmitter. It used as the interface between the aircraft power system, the P3 air pressure transmitter and a voltmeter.SG 350A90-04 | Main Rotor Hub / Mast blanking cap
Data Sheet
Main Rotor Hub / Mast blanking cap This tool is used to blank the Main Rotor Mast when the Spring Anti-vibrator is removed.SG 8819527000 LOOSENING/TIGHTENING TOOL ASSEMBLY FOR INLET CONE
Data Sheet
Loosening/Tightening tool assembly for inlet cone This tool is used to install and remove the inlet cone from the module 02 – Compressor.SG 8819114000 – SG TM0038G003 Engine support, storage and modular assembly
Data Sheet
Tool Use Positions
Engine support, storage and modular assembly This tool is used to hold the engine on a trolley to transport or in a container for storage (compatible with Turbomeca containers). It is used as well to hold the engine during modular replacement. It can be used in horizontal or vertical position.SG 8812331000 Gage for igniter plugs positioning
Data Sheet
Gage for igniter plugs positioning Tool required for the adjustment of the penetration depth of the igniter plugs and start injectors. It is used to measure the thickness of the shims for igniter plugs and start injectors.SG 8816082000 Wrench & inmobilizing
Data Sheet
Wrench & immobilizing This tool is used to install and remove the nut of the output shaft flange. Tool required for replacement of the output drive shaft mag-seal (M01). Immobilizing span guides Wrench in center position, avoiding any misalignment or slippage.SG TM4992G001 Wrench & immobilizing
Data Sheet
Wrench & immobilizing This tool is used to install and remove the nut of the engine output shaft flange. Tool required for replacement of output drive shaft mag-seal (M01). Immobilizing span guides Wrench in center position, avoiding any misalignment and consequent slippage.SG 8812954000 Protector Guide
Data Sheet
Protector Guide This tool is used during removal/installation of the free wheel assy. and removal of the seal retainer cage from the reduction gearbox module. It protects the output shaft splines.SG 8818841000 Hoisting Beam
Data Sheet
Hoisting Beam M05Lifting device.
This tool is used for module 05 "Reduction gearbox" handling and guiding.
Use it to remove, install and replace the module 05 - Reduction gearbox.
CE – Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
Equivalent reference Arriel 1 HOISTING FLANGE FOR REDUCTION GEAR M05.
SG 8813988000
SG 365A91-5400-02 Arriel engine sling
Instruction Manual
Tool Use Positions
Arriel engine sling Fits on all Arriel engines, 1B, 1D1, 2B, 2B1, 2D. CE - Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.SG 703A95-0520-01 Engine oil & hydraulic fluid drain plug
Data Sheet
Engine oil and hydraulic fluid drain plugSG 350A93-2050 Disassembly / Assembly Landing Gear Dampers
Data Sheet
Disassembly / Reassembly Landing Gear Dampers This tool is used to screw and unscrew landing gear damper covers.SG 350A93-5400-00 Support stand, Arriel engine
Data Sheet
Support stand, Arriel engine Hold the engine during MGB removal or MGB input seal replacement. Flat base surface to avoid any marks or deformations on the engine deck. Anti-slippage rubber material.SG 355A93-7540-00 Tooling, replacement load compensator piston seals
Data Sheet
Tooling, replacement load compensator piston seals Allows to install new seals into the piston grooves without any deformation. Also includes tapered guide to install the equipped piston on load compensator sleeve.SG 350A94-2700-06 Flight controls adjustment kit
Data Sheet
Parts List
Flight controls adjustment kit includes: SG 350A94-3701-00 TEMPLATE, 7 DEG. ADJUSTMENT, MRH SG 350A94-2704-00 JAMMING TOOL, PEDALS SG 350A94-2708-01 TOOL, 7° INCIDENCE JAMMING ,TRH SG 350A94-3700-00 LINKS SET, FLIGHT CONTROLS SG 350A94-3700-11 LINK ASSY, SWASHPLATE SG 350A94-3700-10 STRUT, DRAG ASSY, STARFLEX SG 350A94-2706-00 PINS SET, FLIGHT CONTROL SG 350A94-2706-11 PINS, FLIGHT CONTROLS LOCK SG 350A94-2706-12 PINS, FLIGHT CONTROLS LOCK SG 350A94-2706-10 PINS SET, DUNLOP SERVOS INDEX, TRAVEL INPUT RODSSG 355A91-3740-01 Mast hoisting ring
Mast hoisting ring
Used to lift MGB or mast when Spring Anti-Vibrator and Starflex star are removed.
Threaded hole in the center to fit Eurocopter/Airbus tool 350A91-0005-01.
Max lift weight: 1500 kg
Locking plate and bolts included.
CE - Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
SG 350A90-03 Spherical bearing play check tool
Data Sheet
Spherical bearing play check tool This tool is specially design to precisely measure radial play on spherical bearings. Can be either used on Tail Rotor/Main Rotor pitch links and servocontrols.SG 6951 365A31-1090-00 Scissors Link Bushings bonding tool.
Data Sheet
Tool User Guide
Scissors Link Bushings bonding tool
Tool used to perform the replacement of the scissors link bushings. Able to replace individual bushings or by pairs.
Includes bushing extractor SG6801 350A37-1126-01.
Applicable bushings P/N: 04-5026, 2163183