SG 350A93-3206-00  Seal and bush installation, kit
SG 350A93-3206-00 Seal and bush installation, kit
Seal and bush installation, kit Includes:
SG 350A93-3206-21 Shaft protection tool
SG 350A93-3206-20 Seal / bush installation block
 590,00 Add to basket
SG350A90-12 Tail Rotor Control Bearing Lock Device
SG350A90-12 Tail Rotor Control Bearing Lock Device
Tool used to hold and lock the Spider assy in the vice when installing/removing the castellated nut. Fits on all spiders, even reinforced spider plate 350A33-2166-02.
 350,00 Add to basket
SG 350A90-11 Starting / Engine Switch, Wrench
SG 350A90-11 Starting / Engine Switch, Wrench
Starting / Engine Switch, Nut Wrench   It fits on H125, H130, H135. All 900UN Switch series, 2 N.m Torque value. 1/4 Socket. AH TOOL 131.
 96,00 Add to basket
SG 350A93-3309-00 Flange Extractor TGB
SG 350A93-3309-00 Flange Extractor TGB
This tool is used to remove the flange from the Tail Gear Box.
 
 120,00 Add to basket
SG 350A91-3105-02  Sling, Main Rotor Hub
SG 350A91-3105-02 Sling, Main Rotor Hub
Device to remove / install the Main Rotor Hub, straps passing under the sleeves. Maximum admissible lifting load: 500 kg CE – Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
 495,00 Add to basket
SG 6801K33-1058-02 Curing tool, bushes TGB Control Lever
SG 6801K33-1058-02 Curing tool, bushes TGB Control Lever

Replacement of the bushes on the control lever - Tail Gear Box

 Curing tool.

  Equivalent Part Number: SG 350A33105802-6801  
 463,00 Add to basket
SG 6803K33-1058-01 Extraction tool, bushes TGB Control Lever
SG 6803K33-1058-01 Extraction tool, bushes TGB Control Lever

Replacement of the bushes on the control lever - Tail Gear Box

Data Sheet
  Equivalent Part Number:  SG 350A33105801-6803  
 998,00 Add to basket
SG 8819683000 Wrench
SG 8819683000 Wrench

Wrench , removal-installation of the oil filter cover.

1/2 Socket wrench

   
 397,00 Add to basket
SG 350A93-3204-00 MGB flange extractor, rotor brake
SG 350A93-3204-00 MGB flange extractor, rotor brake
Power flange extractor Brake disc removal. Tighten the central screw of the tool to remove the brake disk.
 312,00 Add to basket
SG 355A94-3745-01 Swashplate immobilizing assembly.
SG 355A94-3745-01 Swashplate immobilizing assembly.

Main Rotor Flight Controls (dual hydraulic)

Includes: SG355A94-3745-01 Swashplate immobilizing assembly. Qty: 3 units.
 695,00 Add to basket
SG 350A93-3206-21 Shaft protection tool
SG 350A93-3206-21 Shaft protection tool
Shaft protection tool  Protects de the O-ring from the  MGB shaft splines and step. Slides the friction ring and its o-ring into place while preventing damage from MGB shaft splines.
 346,00 Add to basket
SG 703A91-0211-01 Shackle, size 16
SG 703A91-0211-01 Shackle, size 16
Working Load Limit (WLL): 3,25 Ton. Shackle size: 16 mm - 5/8 " Yellow pin, 19 mm diameter. Delivered with CE Certificate of Confirmity.
 12,00 Add to basket
SG 350A93-3210-00	 MGB sight glass replacement wrench
SG 350A93-3210-00 MGB sight glass replacement wrench
Wrench, MGB oil sight replacement Tool used to remove and install the oil sight with the MGB installed or removed from the airframe.
 265,00 Add to basket
SG 350A93-3201-00 Bush Extractor, MGB seal
SG 350A93-3201-00 Bush Extractor, MGB seal
MGB Seal Bush Extractor . Tool used to remove the slip ring from the MGB input shaft.
 1.387,00 Add to basket
SG 350A98-0001-00 Fin attachment tightening wrench, vertical stabilizer
SG 350A98-0001-00 Fin attachment tightening wrench, vertical stabilizer
Fin attachment tightening wrench During some periodic  inspections, it is required to check the tightening torque of the screws attaching the upper fin to the tail boom. This check is difficult to perform due to the missing clearance between the screws to be checked and the Tail Gearbox (TGB). This tool enables the check the tightening torque of the upper fin attachment screws.
 147,00 Add to basket
SG 350A93-3206-20    Seal / bush installation block
SG 350A93-3206-20 Seal / bush installation block
Seal bush installation block, MGB seal
Keeps a distance of 5.7 mm  between the visible face of the seal and the external face of the input box.      
 265,00 Add to basket
SG 350A90-10 Long Rod Ball-Joint Replacement tool
SG 350A90-10 Long Rod Ball-Joint Replacement tool
This tool kit is used to replace the Long Rod Spherical Bearing. Drawings in accordance with H125 AMM task 67-21-00,8-2      
 970,00 Add to basket
SG 8816540000 Arriel  oil pressure tapping tube module
SG 8816540000 Arriel oil pressure tapping tube module
Tool required for the inspection and check procedures of the engine oil pressure. It is used as the interface between the oil pressure tapping ports and a pressure gauge. Includes: oil hose, pressure gauge and calibration certificate.   Applicability: Arriel 2B pressure tapping from module 01 (front check point) Arriel 1 pressure tapping  from module 01 + 05 (front and rear check point)  
 355,00 Add to basket
SG TM2230G001 Starting valve Sealing test tool
SG TM2230G001 Starting valve Sealing test tool
SGTM2230G001  TOOL FOR LEAKAGE TEST Tool used to do a leakage test at P3 inlet of the start electrovalve.    
 475,00 Add to basket
SG 8816968000 Permeability Measuring Tool
SG 8816968000 Permeability Measuring Tool
PERMEABILITY MEASURING TOOL, ASSEMBLY Tool used to check the permeability of the injection wheel. Arriel 1- All variants, Arriel 2B , 2B1, 2D. Tool in accordance with Original Equipment Manufacturer Service Letter No. 2279/04/ARRIEL1/78
 865,00 Add to basket
SG 350A90-08 Accumulator Charging Tool
SG 350A90-08 Accumulator Charging Tool
Data Sheet
SG350A90-08 has been designed to safety charge accumulator installed in AS350B3®, AS355®, EC120®. This tools provides smooth and high accurate pressure adjustment upon all ranges. Easy to pack and transport. SG350A90-08 includes pressure gauge calibration certificate and foam cut hard case  
  • Pressure release function allowed.
  CE – Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.
 1.185,00 Add to basket
Blanking Caps
Blanking Caps
 Blanking Caps
Complete set of plugs to safety blank all pipes , hoses, connectors and threads commonly used on engine and airframe (H125, H130, H120 and many other Airbus Helicopters types). Includes small tapered caps specially made for Turbomeca fuel/oil cavities and pipes.  
 165,00 Add to basket
SG 350A90-07 Vibrex / Chadwick vibration adjustment, removable parts.
SG 350A90-07 Vibrex / Chadwick vibration adjustment, removable parts.
Complete set of brackets to perform vibration adjustments on Main Rotor, Tail Rotor Drive Shaft and Tail rotor. Includes: 3 tracking brackets (blade tips, main rotor). Swashplate magnetic pick up bracket (main rotor). Mast lateral accelerometer support (main rotor). Vertical accelerometer support, forward section of the cabin floor (main rotor). TRDS photocell bracket. TRDS accelerometer support. Tail Rotor Gearbox bracket, photocell and accelerometer (tail rotor).
 615,00 Add to basket
SG TM3199G002 / SG 8817027000 Tube, Oil Pressure Tapping
SG TM3199G002 / SG 8817027000 Tube, Oil Pressure Tapping
 Datasheet
 
Tool required for the inspection and check procedures of the M05 engine oil pressure. It is used as the interface between the oil pressure tapping part of module 05 and a pressure gauge.
  Includes oil hose and pressure gauge.
 445,00 Add to basket
SG 8819987000 Segment Bonding Tool M04
SG 8819987000 Segment Bonding Tool M04
 Datasheet
 
Tool required for module 04 - Power turbine installation. It is used to hold the two segments in the housing located in the module 04 during the glue curing time.
 675,00 Add to basket
SG TM5614G001 Guiding Studs
SG TM5614G001 Guiding Studs
 Datasheet
 
Tool required for module 02 - Compressor removal and installation procedures.
It is used to guide and position the module 02 - Compressor in relation to the module 01 - Accessory gearbox + transmission shaft.
Set of 4 guiding studs.
 
 187,00 Add to basket
SG 8818828000 Linking Tool, M03
SG 8818828000 Linking Tool, M03
 Datasheet
  Tool used to protect and hold the rotating assembly of the module 03 - Gas generator. Use it after the removal of the module 02 from the module 03. Module 03 remains in lock position for transportation or storage purposes.  
 2.250,00 Add to basket
SG 8810131088 Extractors, M04
SG 8810131088 Extractors, M04
 Datasheet
Tool required for module 04 - Power turbine removal. The extractors are used to remove the module 04  from the module 03 - Gas generator. Set of three extractors.    
 205,00 Add to basket
SG TM1123G001 Measuring Tool, M02
SG TM1123G001 Measuring Tool, M02
 Datasheet
Tool required to measure the axial bolt stretch during M02 installation.    
 682,00 Add to basket
SG TM1463G001 Special Wrench
SG TM1463G001 Special Wrench
 Datasheet
Tool necessary for the installation of the Module 02 (compressor). It is used to tighten the axial nut of the Module 02.
This tool is used before the extension tightening procedure of the axial bolt.
 
 665,00 Add to basket
SG 8813150000 Tripod, Gas Generator Support.
SG 8813150000 Tripod, Gas Generator Support.
 Datasheet
Tool required for module 01 - Accessory gearbox + transmission shaft removal and installation procedures. It is used to hold the gas generator - power turbine assembly when work is done on the module 01.  
 1.058,00 Add to basket
SG 8813368000 Hoisting Beam, Tilting
SG 8813368000 Hoisting Beam, Tilting
Data Sheet
This tool is used for M01 - Acc. gearbox + transmission shaft installation/removal procedures (engine in vertical position). Used to handle the gas generator assy by a hoisting beam. Installed on the intermediate casing/turbine casing flanges. CE - Marking and declaration of conformity according to EC-Machinery Directive 2006/42/EC.  
 1.195,00 Add to basket
SG 350A90-07 Tail Rotor accelerometer support
SG 350A90-07 Tail Rotor accelerometer support
 
Data Sheet
Bracket, tail rotor accelerometer and photocell.
Tool used for Tail Rotor Balancing. Suitable for Chadwick and Banner photocells. Precise setting of photocell pointing, avoid twisting problems on balancing charts.    
 
 197,00 Add to basket
SG 350A90-06 TRDS Bearing Extractor
SG 350A90-06 TRDS Bearing Extractor
 
Data Sheet
Removal / installation Tail Rotor Drive Shaft  Bearings
Complete set of tools used to remove the bearings from the shaft.  
 
 887,00 Add to basket
SGK-06 Removal / Installation MGB 4-Contact Bearing
SGK-06 Removal / Installation MGB 4-Contact Bearing
 
Data Sheet
Assembly / disassembly Main Gear Box 4-contact bearing
Complete set of tools needed to perform the epicyclic 4-contact bearing replacement. Tools included: SG350A93-3221-00 Bearing box replacement SG350A93-3223-00 Extractor, Bearing Housing SG350A93-3224-00 Retainer / Bearing installation  
 
 4.190,00 Add to basket
SG 350A90-05 Landing Gear Skid bumper protectors
SG 350A90-05 Landing Gear Skid bumper protectors
Landing Gear Skids protection Pair of bumper protectors, protect Landing Gear Skid tube from Handling Wheels impacts and damage. 0.5mm thickness, Stainless Steel, matt.
User Guide
 
 170,00 Add to basket
SG 350A93-3714-00 Swashplate Ball Joint Adjustment Tool
SG 350A93-3714-00 Swashplate Ball Joint Adjustment Tool
Adjustment tool, swashplate ball joint This tool is used to mesure and adjust axial play on swashplate ball joint.    
Data Sheet
 
 1.495,00 Add to basket
SG 350A93-3224-00 Retainer / bearing installation
SG 350A93-3224-00 Retainer / bearing installation
Retainer / bearing installation This tool is used to install the planet gear carrier assembly (epicyclic) in the 4-contact bearing.
Data Sheet
SG350A93-3224-20 Pusher SG350A93-3224-21 Mount  
 2.185,00 Add to basket
SG 350A93-3223-00 Extractor, Bearing Housing
SG 350A93-3223-00 Extractor, Bearing Housing
  Bearing / retainer extractor This tool is used to remove the equipped planet gear cage (epicyclic) from the 4-contact bearing.
Data Sheet
 
 3.190,00 Add to basket
SG 350A93-3221-00 Bearing box replacement
SG 350A93-3221-00 Bearing box replacement
Bearing / retainer replacement This tool is used to remove and install the epicyclic 4-contact bearing from the retainer.
Data Sheet
SG350A93-3221-20 Pusher SG350A93-3221-21 Mount  
 675,00 Add to basket